Stiebel Eltron DHC 6 XG Tankless Water Heater – Slim & Powerful

26,990.00 inc. 18% GST

**Stiebel Eltron DHC 6 XG Tankless Electric Water Heater** is a compact 6 kW multi-point water heater designed for bathrooms with limited installation space. Its slim 73 mm depth, durable copper tank, stepless power control, ELCB protection and IP25 splash protection make it suitable for supplying hot water to multiple draw-off points such as a washbasin, bath and shower.

Description

Stiebel Eltron DHC 6 XG Tankless Electric Water Heater

The Stiebel Eltron DHC 6 XG is a compact 6 kW tankless electric water heater designed for applications where installation space is limited but hot water is required at multiple draw-off points. Its extra-slim 73 mm depth makes it particularly useful for installations where space beneath or near a washbasin is restricted.

Manufactured by Stiebel Eltron, the DHC 6 XG (IN) uses a durable copper tank and copper heating element, while stepless power control allows the water temperature to be adjusted according to the application. The unit is designed as a multi-point instantaneous water heater and can supply hot water to points such as a washbasin, bath and shower.

The DHC 6 XG combines compact dimensions with practical safety features. It includes an Earth Leakage Circuit Breaker (ELCB) for protection against electric shock, a thermostat with manual reset for anti-scalding and overheating protection, and an IP25 rating for splash protection. The manufacturer specifies a rated output of 6.0 kW and dimensions of 342 mm high, 216 mm wide and 73 mm deep.

Why Choose the Stiebel Eltron DHC 6 XG?

The main advantage of the Stiebel Eltron DHC 6 XG Tankless Water Heater is its slimline construction. At only 73 mm deep, the appliance can be considered where conventional water heaters may take up more installation space. The compact format is particularly useful in bathrooms, utility areas and other locations where available wall or under-sink space is limited.

Unlike a conventional storage water heater, the DHC 6 XG is an instantaneous water heater designed to heat water as it is required. Its 6 kW rated output and automatic flow switch allow the appliance to operate when the required water flow is reached. Temperature adjustment is carried out through stepless power control, giving the user control over the heating output.

Compact 73 mm Slimline Design

Space can be an important consideration when installing a water heater in a bathroom. The DHC 6 XG has a depth of just 73 mm, allowing it to fit into relatively compact installation areas. The manufacturer specifies dimensions of 342 mm in height, 216 mm in width and 73 mm in depth.

6 kW Rated Output

The DHC 6 XG has a 6.0 kW rated output. It is designed as a single-phase instantaneous water heater for multi-point applications. The actual hot-water flow and achievable outlet temperature depend on incoming water temperature, water flow and available electrical power.

Durable Copper Tank and Heating Element

The appliance incorporates a corrosion-resistant copper heating element and copper tank. This construction is one of the key features of the DHC XG series and is intended to provide durability during normal operation.

Stepless Temperature Adjustment

The Stiebel Eltron DHC 6 XG uses stepless power control for variable temperature adjustment. Instead of relying on a fixed temperature setting, the heating output can be adjusted according to the required application and water flow.

Safety Features

Safety is an important consideration when installing an electric water heater. The DHC 6 XG incorporates several protective features specified by the manufacturer.

  • ELCB protection: Earth Leakage Circuit Breaker protection helps protect against electric shock caused by electrical leakage.
  • Anti-scalding protection: A thermostat with manual reset provides protection against excessive water temperature.
  • Overheating protection: The thermal cut-out helps protect the appliance in the event of excessive temperature.
  • IP25 protection: The IP25 rating provides protection against water projected by a nozzle and is suitable for the manufacturer’s specified installation conditions.
  • Automatic flow switch: The appliance is equipped with an automatic flow switch as specified in the manufacturer’s technical data.

Technical Specifications

SpecificationDetails
BrandStiebel Eltron
ModelDHC 6 XG (IN)
Product Number236217
Product TypeTankless / Instantaneous Electric Water Heater
Rated Output6.0 kW
Dimensions (H × W × D)342 × 216 × 73 mm
Weight2 kg
Tank / Cylinder TypeCopper
Temperature SettingVariable
Temperature ControlOutput Control
Water Connection1/2 inch
TypeClosed Outlet
Automatic Flow SwitchYes
Electrical Fuse ProtectionELCB
Anti-Scalding ProtectionThermostat with manual reset
Protection RatingIP25
ColourSilver

Applications

The Stiebel Eltron DHC 6 XG is designed for multi-point hot-water applications. Depending on the plumbing and electrical installation, it can be considered for locations such as:

  • Bathroom washbasins
  • Bathroom showers
  • Bath areas
  • Small residential bathrooms
  • Utility areas with limited installation space
  • Multiple draw-off points where the appliance is correctly installed and sized for the application

The manufacturer specifically describes the unit as suitable for bathrooms with several draw-off points, including a washbasin, bath and shower.

Installation and Electrical Safety

The DHC 6 XG should be installed and commissioned according to the manufacturer’s installation instructions and applicable electrical and plumbing requirements. Because this is a permanently connected electrical appliance rather than a simple plug-in water heater, installation should be carried out by a qualified and appropriately authorised electrician or service professional.

Before installation, verify the available electrical supply, circuit protection, wiring, water pressure, plumbing connections and installation location. The manufacturer’s technical information specifies a 1/2-inch water connection, ELCB electrical protection and a 6.0 kW rated output.

Do not attempt to modify the electrical protection or wiring specification simply to accommodate the appliance. The installation should follow the manufacturer’s instructions and local electrical regulations. Refer to the official Stiebel Eltron technical documentation before installation or servicing.

Stiebel Eltron DHC 6 XG vs. Other Water Heaters

The DHC 6 XG is best suited to buyers looking for a compact instantaneous water heater rather than a conventional large storage geyser. Its 73 mm depth is particularly useful where installation space is restricted. It also differs from electronically controlled instantaneous models such as the DHC EC series, which use electronic temperature control technology.

If you are comparing different instant water heater capacities, choosing the correct output is important. A 6 kW unit should be selected based on the expected water flow, incoming water temperature, intended application and available electrical supply rather than simply choosing a higher wattage.

Buy Stiebel Eltron DHC 6 XG Online

For customers looking for a Stiebel Eltron DHC 6 XG Tankless Electric Water Heater, GeyserMart provides the product as part of its range of online water heaters. Compare the DHC 6 XG with other Stiebel Eltron models and choose the water-heating solution that best matches your application, electrical supply and available installation space.

For additional information about electric water heaters, you can also explore the GeyserMart Online Water Heater range and the Stiebel Eltron products available on GeyserMart.

For the manufacturer’s specifications, installation information and technical documentation, refer to the official Stiebel Eltron DHC 6 XG product page.

Frequently Asked Questions

What is the Stiebel Eltron DHC 6 XG?

The Stiebel Eltron DHC 6 XG is a 6.0 kW tankless instantaneous electric water heater designed for multi-point hot-water applications. It features a compact 73 mm depth and a copper tank.

What is the power rating of the DHC 6 XG?

The DHC 6 XG has a rated output of 6.0 kW.

How deep is the Stiebel Eltron DHC 6 XG?

The DHC 6 XG has a depth of 73 mm, or 7.3 cm, making it a slimline option for installations where space is limited.

Does the DHC 6 XG have a copper tank?

Yes. The manufacturer specifies a copper cylinder/tank and a corrosion-resistant copper heating element.

Is the DHC 6 XG suitable for multiple outlets?

Yes. The DHC 6 XG is designed as a multi-point instantaneous water heater and is suitable for applications with multiple draw-off points such as a washbasin, bath and shower.

What safety features does the DHC 6 XG have?

The appliance includes ELCB protection, anti-scalding and overheating protection through a thermostat with manual reset, an automatic flow switch and IP25 protection.

What is the IP rating of the DHC 6 XG?

The Stiebel Eltron DHC 6 XG has an IP25 protection rating.

How should the DHC 6 XG be installed?

The appliance should be installed and commissioned according to the manufacturer’s installation instructions and applicable electrical and plumbing requirements. A qualified and appropriately authorised professional should carry out the electrical installation.

What are the dimensions of the DHC 6 XG?

The manufacturer’s technical data specifies dimensions of 342 mm height × 216 mm width × 73 mm depth, with a weight of approximately 2 kg.

Additional information

Weight2 kg
Dimensions216 × 73 × 342 mm
Adjustable Thermostat

Yes

BEE Star

N/A

Body Material

ABS

Capacity (Liter)

Tankless

Classification

Tankless Water Heater

Color

Silver

Earth Leakage Circuit Braker

Yes

Mount Type

Vertical

Country Of Origin

Made In Germany

Remote Option

No

Temperature Display

No

Thermal Cutout

Yes

Thermostat

Electronic Temperature Control, Yes

Voltage

AC 220 V Single phase, 3 wire

Warantee

1 year full

Wattage

6 Kw

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…